Firmware Applicable Models and Motherboard Versions
Printer model: CR-200B Pro
Printer motherboard version number: CR6WU220530S14
illustrate: This firmware is the CR-200B Pro nozzle 300°C standard kit version.
Screen update instructions:
1 Format the TF card on the computer side, select "FAT32" for the file system and select "4096" for the allocation unit size
2. Put "DWIN_SET", "firmware.zlib" and "private" in the root directory of the same TF card
3 Turn off the printer, insert the TF card into the card slot on the back of the screen
4. Restart the machine and wait for the update to complete
5. After the update is complete, take out the TF card and delete the files inside
Board update:
1. Format the U disk card on the computer, select "FAT32" for the file system, and select "32KB" for the allocation unit size
2. Place the firmware "CR-200B-PRO-Marlin2.0.8.1-SW-V1.0.4-TEMP300.bin" file in the root directory of the U disk
3. Turn off the printer, insert the U disk into the card slot of the machine
4. Restart the machine and wait
5. After the firmware upgrade is successful, unplug the U disk and delete the files inside
Firmware Applicable Models and Motherboard Versions
Printer model: CR-200B Pro
Printer motherboard version number: CR6WU220530S14
illustrate:
This firmware is the CR-200B Pro nozzle 260°C standard kit version.
Screen update instructions:
1 Format the TF card on the computer side, select "FAT32" for the file system and select "4096" for the allocation unit size
2. Put "DWIN_SET", "firmware.zlib" and "private" in the root directory of the same TF card
3 Turn off the printer, insert the TF card into the card slot on the back of the screen
4. Restart the machine and wait for the update to complete
5. After the update is complete, take out the TF card and delete the files inside
Board update:
1. Format the U disk on the computer, select "FAT32" for the file system, and select "32KB" for the allocation unit size
2. Place the firmware "CR-200B-PRO-Marlin2.0.8.1-SW-V1.0.4-TEMP260.bin" file in the root directory of the U disk
3. Turn off the printer, insert the U disk into the card slot of the machine
4. Restart the machine and wait
5. After the firmware upgrade is successful, unplug the U disk and delete the files inside