Welcome to Creality    

Creality
Store
Space Pi X4L
Creality SpacePi X4L
The First Choice for Multi-Color Drying
Buy Now
Up to 75°C
Dual Independent Heating Chambers
4 Spools
Same Smart Sensor as the X4
LCD Touchscreen
Double Safety Protection
Moisture-proof Sealing Design
Dry 4 Spools at Once
Dry and print at once for maximum efficiency
Effortless multi-color printing, seamless multi-filament drying
Dual Independent
Chambers,
Customized Drying
Each chamber features its own PTC heater,
allowing independent temperature control.
One machine, tailored to dry different fila-
ments simultaneously.
Flexible Drying Modes, Energy-Smart
Switch between single and dual-chamber modes as needed.
Single-chamber mode saves up to 40% energy, giving you flexible,
cost-effective drying options.
Single Chamber Mode
75°C Drying time: 1h
0.095kWh
Dual Chamber Mode
75°C Drying time: 1h
0.165kWh
Perfect Prints with SpacePi X4L
Moist filaments can cause stringing, clogs, layer shifts, and poor adhesion.
The SpacePi drying box quickly removes moisture, restores filament to its
optimal state, and ensures smooth extrusion and consistent print quality.
Moist
PA-CF
Dry
High-Temp Drying
up to 75°C
Dual 200W PTC heaters with insulation
design provide stable, efficient heat.
PLA, PETG, ABS... all dry effortlessly, keeping your filaments print-ready at all times.
Advanced PTC Technology for Even Drying
Ceramic PTC heating elements
positioned near the fan deliver
stable hot air.
360° hot-air circulation
wraps around the filament,
dispersing moisture evenly.
Desiccant regeneration
during the drying process.
Ceramic PTC Heater
Desiccant Regeneration
Smart Sensors, Precise Control
Same advanced sensor as the X4 for faster, more reliable monitoring.
Catches even the tiniest shifts in temperature and humidity.
Keep Filaments Fresh,
Keep Ideas Flowing.
Responsive LCD Touchscreen Control
Featuring a new display design with anti-static treatment, it delivers
excellent visibility even in winter. The built-in auto-drying mode and
real-time humidity monitoring keep your filament in optimal condition
at all times.
Dual-Layer Insulation, Safe to Touch
Double insulation locks in heat.
Internal temperature reaches up to 75°C while the exterior
stays ≤60°C, safe to handle.
Outer Average Temperature
Dual Overheat Protection,
Safe and Reliable
Built-in PTC self-resetting fuses automatically
cut power if overheating occurs, reconnecting
once temperature returns to normal.
NTC sensors monitor the outlet; any
abnormality pauses the drying process
instantly.
Broad Compatibility, Ready for Any Filament
Supports 1kg/2kg spools, with 1.75mm or 2.85mm filament diameters.
Fits spools up to 200mm in diameter and 150mm in width, handling most
common filaments with ease.
Quality Details
Soft Silicone
Tube Connector
Top and Rear Outlet Design
Moisture-proof Sealing Design
Sliding Lock
Anti-scalding Roller
COMPARISON
NEW
Creality SpacePi X4L
The First Choice for Multi-Color Drying
BUY NOW
45-75°C Drying Temp 1-48h Timing
4 Spool Capacity
Dual Independent Heating Chambers
340W Power Consumption
-
Built-in Desiccant
High Sealing Ring
3.2"LCD Screen
Auto Drying Mode
Chamber-Specific Settings
-
-
-
-
-
-
Overheat Protection
NTC Sensor at Air Outlet + PTC Fuse + Overheat Auto Shutoff
-
Creality SpacePi X4
Dry More, Create More
BUY NOW
45-85°C Drying Temp 1-48h Timing
4 Spool Capacity
Dual Independent Heating Chambers
360W Power Consumption
Active Dehumidification
Built-in Desiccant
High Sealing Ring + One-way Valve
3.2"IPS Touchscreen
Auto Drying Mode
Chamber-Specific Settings
Mixed Filament Support
"My Drying" Presets
3 Custom Slots
Auto Silent Mode
Beep Reminder
Dual Auto LED Lights
Fan Self-Diagnosis Stops on Malfunction
Overheat Protection
NTC Sensor at Air Outlet + PTC Fuse + Overheat Auto Shutoff
TF Card Firmware Upgrade
Product Parameters
Product Name:
Creality SpacePi X4L
Product Size:
382*290*270mm
Packaging Size:
453X350x330mm
Product Net weight:
5kg
Housing Material:
ABS/PA/PC
Temperature Range:
45-75°C
Drying Time:
1-48h
Rated Power:
340W
Input Voltage:
UK/GB/EUR/AUS/BRA/CHL/ARG 220-240V~50/60HzUS/JPN 100-120V~50/60HZ
Applicable Filament:
Spool Diameter ≤200mm, width ≤150mm, wire diameter:1.75/2.85mm
Explore more about SpacePi X4L
1.What is the difference between SpacePi X4 and SpacePi X4L?
SpacePi X4L is the LITE version of SpacePi X4. Its maximum drying temperature is 75°C and its screen is adjusted to a digital screen, but it also has the function of dual-chamber independent drying.
2.What types of filaments can SpacePi X4L dry?
SpacePi X4L supports drying common filaments like PLA, PETG, ABS, ASA, PET, PA, PC,PP,TPU, and their variations. For best results, follow the drying temperature recommended by thefilament manufacturer. Filaments requiring drying temperatures up to 75℃ can be dried efficiently.Those needing higher temperatures can still be dried, but with longer drying times.
3.Can I use 3kg or 5kg spools?
As long as the spool diameter is ≤200mm, width ≤l50mm, and filament diameter is 1.75mm or 2.85mm.
4.Can I dry filament while printing?
We recommend drying the filament thoroughly before printing. Drying time varies by material-referto the user manual or the manufacturer's guidelines. Once dried, you can feed the filament to your printer using a 4mm PTFE tube.Yes, you can dry filament while printing. The dual-chamber design allows you to dry one spool while using another for printing.
5.Can I use CFS and SpacePi X4L together?
We suggest drying filament fuly in spacePi X4L before transferring it to CFS for printing. While CFS isin use, you can pre-dry and store the next batch in SpacePi X4L, improving workflow efficiency withoutoccupying CFS resources.