![](http://img.fantaskycdn.com/a62a55a3884ab4cadf2d27abec49e8db_{width}x.jpg)
![](http://img.fantaskycdn.com/5ffac23755e57c3d9acf69275d68aff7_{width}x.jpg)
CR-10 SE uses both a CR Touch and a strain sensor to do leveling and Z offset automatically the first time it is powered on.
It delivers an excellent first layer without you lifting a finger.
![](http://img.fantaskycdn.com/d763f854e92d2ba78c3536350a86c0bc_{width}x.jpg)
![](http://img.fantaskycdn.com/02a2186579e8fa217cdf34535d10b2c6_{width}x.jpg)
The precise linear rails on the X and Y-axis have carriage slides containing ball bearings, making each move accurate, steady, and frictionless (0.04 friction coefficient*).
Built out of stiff steel, they will stay as new even after long-time use.
*Data from Creality Lab.
Make Each 3D Print Stunning
![](http://img.fantaskycdn.com/57b73a4c94556708488028b611bff728_{width}x.jpg)
![](http://img.fantaskycdn.com/49a1680f2d50a40ea1d64809fa49e83c_{width}x.jpg)
A 12000rpm fan sends a strong wind via a U-shaped air duct to cool the freshly printed model section from three sides.
It improves the bridges and overhangs significantly and makes the details more vivid.
![](http://img.fantaskycdn.com/91638bad0fa6809ffc5f6a4b74484323_{width}x.jpg)
![](http://img.fantaskycdn.com/2dba4682ee260415faffc134a0f6ae02_{width}x.jpg)
CR-10 SE features a "Sprite" direct drive extruder with two gears (1:3.5 gear ratio) that exerts a strong extrusion force of 65N*.
The feeding and retraction are exact and uniform, even when it comes to flexible filaments.
*Data from Creality Lab.
![](http://img.fantaskycdn.com/589c1639018e4c45b439837f9fcdb998_{width}x.jpg)
![](http://img.fantaskycdn.com/7c494ab5ca213de1fff5dfca7a6db1bb_{width}x.jpg)
60W ceramic heater encircling the hotend, getting the filament fully melted at a 32mm³/s flow*;
Bi-metal (copper+titanium alloy) heatbreak, great to prevent thermal creep;
Hardened steel nozzle, wear-resistant and enabling 300°C* printing.
*Data from Creality Lab. The tests are conducted at a 25℃ room temperature.