Follow this operation manual.
BLTouchFilament 29 Nov. 2022
Printer: Ender-5 Pro
Printer Mainboard: V4.2.2
motherboard chip:
Notes: The firmware is Ender-5 Pro GD chip motherboard firmware. Support the installation of BL-touch/CR-touch to realize the automatic leveling function, support the installation of a material breaking detection module to realize the material breaking detection function, and support the switching between Chinese and English.
Mainboard firmware update:
1. Format the TF card on the computer side, and select 4096 for the allocation unit size.
2. Put the firmware file "Ender-5 ProMarlin2.0.6HW4.2.2GDBLTouchFilament.bin" into the TF card.
3. Turn off the printer and insert the TF card into the card slot on the motherboard.
4. Reboot and wait for the update to finish.
5. After finishing the update, remove the TF card from the motherboard slot and delete the bin file inside.
Printer: Ender-5 Pro
Printer Mainboard: V4.2.2
motherboard chip:
Notes: The firmware is Ender-5 Pro GD chip motherboard firmware. Support the installation of BL-touch/CR-touch to realize the automatic leveling function, and support the switching between Chinese and English.
Mainboard firmware update:
1. Format the TF card on the computer side, and select 4096 for the allocation unit size.
2. Put the firmware file "Ender-5 ProMarlin2.0.6HW4.2.2GDBLTouch.bin" into the TF card.
3. Turn off the printer and insert the TF card into the card slot on the motherboard.
4. Reboot and wait for the update to finish.
5. After finishing the update, remove the TF card from the motherboard slot and delete the bin file inside.
Printer: Ender-5 Pro
Printer Mainboard: V4.2.2
motherboard chip:
Notes: The firmware is Ender-5 Pro GD chip motherboard firmware. Support Chinese and English switching
Mainboard firmware update:
1. Format the TF card on the computer side, and select 4096 for the allocation unit size.
2. Put the firmware file "Ender-5 ProMarlin2.0.6HW4.2.2GD.bin" into the TF card.
3. Turn off the printer and insert the TF card into the card slot on the motherboard.
4. Reboot and wait for the update to finish.
5. After finishing the update, remove the TF card from the motherboard slot and delete the bin file inside.
Printer: Ender-5 Pro
Printer Mainboard: V4.2.2
motherboard chip:STM32F103RET6
Notes: This firmware is the automatic leveling firmware of Ender-5 Pro. Support the installation of BL-touch or CR-touch to realize the automatic leveling function, and support the switching between Chinese and English.
Mainboard firmware update:
1. Format the TF card on the computer side, and select 4096 for the allocation unit size.
2. Put the firmware file "Ender-5 ProMarlin2.0.6HW4.2.2BLTouch.bin" into the TF card.
3. Turn off the printer and insert the TF card into the card slot on the motherboard.
4. Reboot and wait for the update to finish.
5. After finishing the update, remove the TF card from the motherboard slot and delete the bin file inside.
Printer: Ender-5 Pro
Printer Mainboard: V4.2.2
motherboard chip:STM32F103RET6
Notes: This firmware is the factory standard firmware of Ender-5 Pro.Support Chinese, English, Japanese, Korean, German, French, Russian, Spanish, Portuguese language switching.
Mainboard firmware update:
1. Format the TF card on the computer side, and select 4096 for the allocation unit size.
2. Put the firmware file "Ender-5 ProMarlin2.0.6HW4.2.2AsiaMulti.bin" into the TF card.
3. Turn off the printer and insert the TF card into the card slot on the motherboard.
4. Reboot and wait for the update to finish.
5. After finishing the update, remove the TF card from the motherboard slot and delete the bin file inside.
Printer: Ender-5 Pro
Printer Mainboard: V4.2.2
motherboard chip:STM32F103RET6
Notes: This firmware is the three-language firmware for Ender-5 Pro. Support Chinese, English, Portuguese switching.
Mainboard firmware update:
1. Format the TF card on the computer side, and select 4096 for the allocation unit size.
2. Put the firmware file "Ender-5 Pro-Marlin2.0.1-HW-V4.2.2-SW-V1.0.3-Endstop-pt_20210325.bin" into the TF card.
3. Turn off the printer and insert the TF card into the card slot on the motherboard.
4. Reboot and wait for the update to finish.
5. After finishing the update, remove the TF card from the motherboard slot and delete the bin file inside.
Printer: Ender-5 Pro
Printer Mainboard: V4.2.2
motherboard chip:STM32F103RET6
Notes: This firmware is the factory standard firmware of Ender-5 Pro. English firmware.
Mainboard firmware update:
1. Format the TF card on the computer side, and select 4096 for the allocation unit size.
2. Put the firmware file "Ender-5 Pro-Marlin2.0.1-HW-V4.2.2-SW-V1.0.1-Endstop.bin" into the TF card.
3. Turn off the printer and insert the TF card into the card slot on the motherboard.
4. Reboot and wait for the update to finish.
5. After finishing the update, remove the TF card from the motherboard slot and delete the bin file inside.
Printer: Ender-5 Pro
Printer Mainboard: V4.2.2
motherboard chip:
Notes: This firmware is the four-language firmware for Ender-5 Pro. Support Chinese, English, Portuguese, Spanish switching.
Mainboard firmware update:
1. Format the TF card on the computer side, and select 4096 for the allocation unit size.
2. Put the firmware file "Ender-5 Pro-HW-V4.2.2-SW-V2.0.8.25-ZH-CN-En-Pt-Sp-20220402.bin" into the TF card.
3. Turn off the printer and insert the TF card into the card slot on the motherboard.
4. Reboot and wait for the update to finish.
5. After finishing the update, remove the TF card from the motherboard slot and delete the bin file inside.
_SW_V1.0.4_EndstopZN_EN_pt_es-20210303 29 Nov. 2022
Printer: Ender-5 Pro
Printer Mainboard: V4.2.2
motherboard chip:STM32F103RET6
Notes: This firmware is the four-language firmware for Ender-5 Pro. Support Chinese, English, Portuguese, Spanish switching.
Mainboard firmware update:
1. Format the TF card on the computer side, and select 4096 for the allocation unit size.
2. Put the firmware file "Ender_5Pro_Marlin2.0.1_HW_V4.2.2_SW_V1.0.4_EndstopZN_EN_pt_es-20210303.bin" into the TF card.
3. Turn off the printer and insert the TF card into the card slot on the motherboard.
4. Reboot and wait for the update to finish.
5. After finishing the update, remove the TF card from the motherboard slot and delete the bin file inside.