1. Translation optimisation for all interfaces.

2. Add new language translation via config file.

3. Add ai sensitivity setting.

4. Add object exclusion function.

5. Exclude objects using border colour and thickness to indicate different states of the object.

6. Modify the translation of print flow and throat fan detection prompts.

7. Update Japanese translation.

8. Add a length limit for Wi-Fi passwords.

9. Add underscore symbol to numeric keypad.

10. Optimise the problem that the content of the tips in the light tips box is occasionally not vertically centred.

1. Stopping printing after modifying the use of objects will cause some slicing machine coordinates to be wrong.

2. Modify the U disk can not be recognized, access to the nebula screen file scanning progress has been 0% problem.

3. Fix the problem that you are stuck in the WiFi search interface when there is no WiFi signal and cannot enter the next step of self-test.

4. When modifying the vibration compensation, there will be an incorrect display of the X-axis picture during re-detection.

5. If you do not enter the AI detection setting interface, direct calibration will report that no liDAR problem has been detected.

6. If the USB flash drive is removed during file scanning, the scanning progress dialog box is displayed.

7. If you click Upload log after the mainboard communication fails to be modified, a message indicating that logs are successfully exported is displayed.

8. When the APP is launched to zero, no problem is displayed when the screen clicks the axis to move.

9. Do a Z-axis calibration if the configuration file is modified after adding the upgrade.

10. Add APP launch return to zero, and the screen can launch self-check function.

11. Add the function of using USB flash drive files to skip the log upload without masking during the startup self-test.

1. Add data collection function.

2. Modify the generation process of printing records.

3. Reset klipper printing data.

4. Change the condition of the prompt "Printing is currently not allowed" to non printing idle state or printing stop state.

5. Whether to select a file for adding operations such as copying and deleting files.

6. Remove the click effect of the file operation pop-up window.

7. Language switching increases interface refresh waiting time by 1 second.

8. Solve the bug of 100% water injection in the model that has not been completed, pause printing, enter the file preview interface, and then return to the printing interface.

9. Modify the calculation and display of remaining time and printed time.

10. Modifying the network list of the guidance process cannot ignore the bug of connected WiFi.

11. Actively scrolling to the top of the privacy policy content list to adapt to changes in list height during content switching, solving the problem of blank content areas appearing at the bottom when the list height changes.

12. New pop-up processing for MCU communication failure.

13. Add and delete video functions on the video details interface.

14. Add Ender3 V3 SE model and implement its self inspection process and vibration compensation process with reference to f005.

15. When an error occurs during machine startup, turn off the startup prompt and display an error message.

16. Do not handle errors with error levels 0-500 before adding a universal screen without selecting a model.

1. Ender3V3SE_firmware; Adaptive Ender-3 V3 SE

2. firmware_Nebula_Pad；Adaptive Ender-3/Ender-3 PRO/Ender-3 V2/Ender-3 V2 Neo 4.2.7 mainboard