Follow this operation manual.
Engineer's Report - June 2022
Prepared by: Maël DUPORTAL - 3D Printing Industry
Firmware Applicable Models and Motherboard Versions
Printer model: Sermoon V1Pro
Printer motherboard version number: V200
illustrate: The screen firmware has 9 languages including Korean
Screen update instructions:
1 Format the TF card on the computer side, select "FAT32" for the file system and select "4096" for the allocation unit size
2. Put "DWIN_SET", "private" and "firmware.zlib" in the root directory of the same TF card
3 Turn off the printer, insert the TF card into the card slot on the back of the screen
4. Restart the machine and wait for the update to complete
5. After the update is complete, take out the TF card and delete the files inside
Board update:
1. Format the SD card on the computer, select "FAT32" for the file system, and select "Default allocation size" for the allocation unit size
2. Place the firmware "firmware-Pro-V3.0.37-K1-20220817.bin" file in the root directory of the SD card
3. Turn off the printer, insert the SD card into the card slot of the machine
4. Restart the machine and wait
5. After the firmware upgrade is successful, unplug the SD card and delete the files inside
Firmware Applicable Models and Motherboard Versions
Printer model: Sermoon V1
Printer motherboard version number: V200
illustrate: The screen firmware has 9 languages including Korean
Screen update instructions:
1 Format the TF card on the computer side, select "FAT32" for the file system and select "4096" for the allocation unit size
2. Put "DWIN_SET", "private" and "firmware.zlib" in the root directory of the same TF card
3 Turn off the printer, insert the TF card into the card slot on the back of the screen
4. Restart the machine and wait for the update to complete
5. After the update is complete, take out the TF card and delete the files inside
Board update:
1. Format the SD card on the computer, select "FAT32" for the file system, and select "Default allocation size" for the allocation unit size
2. Place the firmware "firmware-V1-V1.0.37-K1-20220902.bin" file in the root directory of the SD card
3. Turn off the printer, insert the SD card into the card slot of the machine
4. Restart the machine and wait
5. After the firmware upgrade is successful, unplug the SD card and delete the files inside
1.Screen firmware upgrade: Put all files in ScreenFirmware into SD card together, insert it into the screen card slot, and power on again to update.
2.Motherboard firmware upgrade: Firmware-Pro-V3.0.37-K1-20220817.bin file into the SD card, insert the machine end card slot, re-power update.
1. Screen firmware upgrade: Put all files in ScreenFirmware into SD card together, insert it into the screen card slot, and power on again to update.
2. Motherboard firmware upgrade: Firmware-V1-V1.0.37-K1-20220902.bin file into the SD card, insert the machine end card slot, re-power update.
1.Add network recovery function, while increasing the network status icon display.
2.Add the chassis fan to open and close automatically according to the target temperature of the hot bed, distinguishing between PLA and ABS printing.
1、Solve the problem of machine probabilistic material jam when returning materials.
2、Increase the LED interactive control between the machine and the app.