Firmware Applicable Models and Motherboard Versions

Printer model: Sermoon D3 Pro

Printer motherboard version number: CR6WU220525S14

illustrate:

Fix known problems, adapt to the automatic calibration module silk screen position of the new printing board.

Screen update instructions:

1 Format the TF card on the computer side, select "FAT32" for the file system and select "4096" for the allocation unit size.

2. Place the "private" folder and the "firmware.zlib" file in the root directory of the same TF card.

3 Turn off the printer, insert the TF card into the card slot on the back of the screen.

4. Restart the machine and wait for the update to complete.

5. After the update is complete, take out the TF card and delete the files inside.

Board update:

1. Format the U disk on the computer, select "FAT32" for the file system, and select "32KB" for the allocation unit size.

2. Place the folder "STM32F4_UPDATE" in the root directory of the U disk.

3. Turn off the printer, insert the U disk into the card slot of the machine.

4. Restart the machine and wait.

5. After the firmware upgrade is successfully entered into the main interface of the menu, pull out the U disk.

6. On the main menu interface, select "Print Settings - Restore Factory" and confirm.

7. After restoring the factory, please select the local language, otherwise you will not be able to connect to Chuangxiang Cloud.

8. Operate the machine according to the screen guidance.

9. Delete all the files in the U disk.

Firmware Applicable Models and Motherboard Versions

Printer model: Sermoon D3Pro

Printer motherboard version number: CR6WU220525S14

illustrate:

Fix known problems, adapt to the automatic calibration module silk screen position of the new printing board

Screen update instructions:

1 Format the TF card on the computer side, select "FAT32" for the file system and select "4096" for the allocation unit size

2. Place the "private" folder and the "firmware.zlib" file in the root directory of the same TF card

3 Turn off the printer, insert the TF card into the card slot on the back of the screen

4. Restart the machine and wait for the update to complete

5. After the update is complete, take out the TF card and delete the files inside

Board update:

1. Format the U disk on the computer, select "FAT32" for the file system, and select "32KB" for the allocation unit size

2. Place the folder "STM32F4_UPDATE" in the root directory of the U disk

3. Turn off the printer, insert the U disk into the card slot of the machine

4. Restart the machine and wait

5. After the firmware upgrade is successfully entered into the main interface of the menu, pull out the U disk

6. On the main menu interface, select "Print Settings - Restore Factory" and confirm

7. After restoring the factory, please select the local language, otherwise you will not be able to connect to Chuangxiang Cloud

8. Operate the machine according to the screen guidance

9. Delete all the files in the U disk.

New features:

1. Added functions for renaming, deleting G-code of LAN devices.

2. Added functions for renaming, deleting and sharing time-lapse photography files of LAN devices.

3. Added CR-10 SE and Ender-3 V3 KE printers.

4. Added 10 new sonic screen compatible printers.

5. Added Aligned Rectilinear filling method.

6. Added support judgment function when slicing.

7. Added G-code sharing function in crealitycloud Personal Center.

8. Added new prompts for models that are too large or too small when importing.

Optimization features:

1. Optimize the language and server selection when starting the software for the first time.

2. Optimize the update the slicing configuration of Ender-3 V3 SE, Ender-3 S1, Ender-3 S1 Pro, Ender-3 S1 Plus, Ender5 S1, K1, K1 Max, and Sermoon D3 Pro.

3. Optimize the temperature and flow preview of calibration function.

4. Optimize the large model import and slicing performance.

5. Optimize the the speed and success rate of tree support generation.

6. Optimize the the printing effect of the active model.

7. Optimize the top printing effect.

8. Optimize the accuracy of G-code printing information.

9. Optimize the temporary documents and project documents.

10. Optimize the interaction on the left operation bar.

11. Optimize the model download center sorting.

12. Optimize the LAN device status, network update, printing control.

Key bug fixes:

1. Fixed known slice stuck and crash issues.

2. Fix the problem of G-code file upload in LAN.

3. Fixed G-code file generation, saving and parsing issues.

4. Fixed CR-30 adhesion and slice display issues.

5. Fixed Sermoon D3 Pro printing logic and heating logic issues.

6. Fixed the problem of flattening the model.

7. Fixed notebook windows 11 system and 4K resolution compatibility issues.

8. Fixed parameter linkage, operation, ineffectiveness and translation issues of the parameter system.

9. Fix other known issues.

Creality Print V4.3.6.6242 updates:

1. Added Sermoon M500 and Ender-3 V3 SE printers.

2. Added delete options for configuration files and downloaded models during overwriting installation.

3. Added the "Calibration" menu function.

4. Added "Standard Model" function in the file menu.

5. Added the import of STEP file format.

6. The help menu increases the "Mouse Operation Function".

7. Help - Use Course menu to update the user manual.

8. Added multiple mode previews and optimized the existing preview data.

9. LAN printing adds the export function of G-code and time-lapse photography files.

10. LAN printing adds the function of importing multiple files.

11. The LAN function of Sermoon D3 Pro has newly added the display and setting of the temperature of the left/right nozzle and the temperature of the chamber.

12. The k1/k1 max LAN function adds chamber fan control.

13. Optimize the G-code preview display and printer preview adaptation.

14. Optimization Model tree support and custom Z seam hidden .

15. The prompt optimization after the modification of slice configuration.

16. Optimization Sermoon D3 Pro dual-nozzle printing and K1/K1 Max high-speed printing effect .

17. Software version update detection mechanism and prompt optimization.

18. Optimization known problem of parameter system.

19. Other known bug fixed.

Creality Print V4.3.6.6200 updates:

1. Added Sermoon M500 and Ender-3 V3 SE printers.

2. Added delete options for configuration files and downloaded models during overwriting installation.

3. Added the "Calibration" menu function.

4. Added "Standard Model" function in the file menu.

5. Added the import of STEP file format.

6. The help menu increases the "Mouse Operation Function".

7. Help - Use Course menu to update the user manual.

8. Added multiple mode previews and optimized the existing preview data.

9. LAN printing adds the export function of G-code and time-lapse photography files.

10. LAN printing adds the function of importing multiple files.

11. The LAN function of Sermoon D3 Pro has newly added the display and setting of the temperature of the left/right nozzle and the temperature of the chamber.

12. The k1/k1 max LAN function adds chamber fan control.

13. Optimize the G-code preview display and printer preview adaptation.

14. Optimization Model tree support and custom Z seam hidden .

15. The prompt optimization after the modification of slice configuration.

16. Optimization Sermoon D3 Pro dual-nozzle printing and K1/K1 Max high-speed printing effect .

17. Software version update detection mechanism and prompt optimization.

18. Optimization known problem of parameter system.

19. Other known bug fixed.

Creality Print v4.3.5.5769 changelist:

1. Optimize K1, K1 Max, Sermoon D3 Pro Printer， filament and slicing parameters.

2. Optimize known parameter system problems.

3. Optimize the G-code preview display problem of known printer.

4. Optimize the slice parameters of Ender-5 S1, Ender-3 S1, Ender-3 S1 Pro, and Sonic Pad printer;

5. Optimize some issues of version update.

6. Optimize the menu bar edit, view, and Tools submenu functions.

7. Optimize some known UI restoration problems.

8. Optimize the network refresh problem of LAN devices.

9. Optimize known LAN operation and display problems.

10. Optimize known model operation and 3D rendering problems.

11. Optimize the model cutting and model lettering functions.

12. Optimize the user-specified Z seam and Z seam parameters.

13. Fix the known Sermoon D3 Pro slicing problem.

14. Fix the crash problem of imported printer parameters.

15. Fix the known slice crash problem.

16. Fixed the problem that CR-5Pro and CR-5Pro-H cannot be added.

17. Fix some problems of model download and download management.

18. Fix some problems of Creality Cloud login and Creality Cloud personal center.

19. Fix other known bugs.

New features:

1. Added functions for renaming, deleting G-code of LAN devices.

2. Added functions for renaming, deleting and sharing time-lapse photography files of LAN devices.

3. Added CR-10 SE and Ender-3 V3 KE printers.

4. Added 10 new sonic screen compatible printers.

5. Added Aligned Rectilinear filling method.

6. Added support judgment function when slicing.

7. Added G-code sharing function in crealitycloud Personal Center.

8. Added new prompts for models that are too large or too small when importing.

Optimization features:

1. Optimize the language and server selection when starting the software for the first time.

2. Optimize the update the slicing configuration of Ender-3 V3 SE, Ender-3 S1, Ender-3 S1 Pro, Ender-3 S1 Plus, Ender5 S1, K1, K1 Max, and Sermoon D3 Pro.

3. Optimize the temperature and flow preview of calibration function.

4. Optimize the large model import and slicing performance.

5. Optimize the the speed and success rate of tree support generation.

6. Optimize the the printing effect of the active model.

7. Optimize the top printing effect.

8. Optimize the accuracy of G-code printing information.

9. Optimize the temporary documents and project documents.

10. Optimize the interaction on the left operation bar.

11. Optimize the model download center sorting.

12. Optimize the LAN device status, network update, printing control.

Key bug fixes:

1. Fixed known slice stuck and crash issues.

2. Fix the problem of G-code file upload in LAN.

3. Fixed G-code file generation, saving and parsing issues.

4. Fixed CR-30 adhesion and slice display issues.

5. Fixed Sermoon D3 Pro printing logic and heating logic issues.

6. Fixed the clone function of Linux version.

7. Fixed the Mac version non-default Z-seam slicing crash, parameter configuration display, project file and model upload issues.

8. Fixed the problem of flattening the model.

9. Fix other known issues.

Creality Print V4.3.6 updates：

1. Added Sermoon M500 and Ender-3 V3 SE printers.

2. Added delete options for configuration files and downloaded models during overwriting installation.

3. Added the "Calibration" menu function.

4. Added "Standard Model" function in the file menu.

5. Added the import of STEP file format.

6. The help menu increases the "Mouse Operation Function".

7. Help - Use Course menu to update the user manual.

8. Added multiple mode previews and optimized the existing preview data.

9. LAN printing adds the export function of G-code and time-lapse photography files.

10. LAN printing adds the function of importing multiple files.

11. The LAN function of Sermoon D3 Pro has newly added the display and setting of the temperature of the left/right nozzle and the temperature of the chamber.

12. The k1/k1 max LAN function adds chamber fan control.

13. Optimize the G-code preview display and printer preview adaptation.

14. Optimization Model tree support and custom Z seam hidden .

15. The prompt optimization after the modification of slice configuration.

16. Optimization Sermoon D3 Pro dual-nozzle printing and K1/K1 Max high-speed printing effect .

17. Software version update detection mechanism and prompt optimization.

18. Optimization known problem of parameter system.

19. Other known bug fixed.

Creality Print v4.3.5.5769 changelist:

1. Optimize K1, K1 Max, Sermoon D3 Pro Printer， filament and slicing parameters.

2. Optimize known parameter system problems.

3. Optimize the G-code preview display problem of known printer.

4. Optimize the slice parameters of Ender-5 S1, Ender-3 S1, Ender-3 S1 Pro, and Sonic Pad printer.

5. Optimize some issues of version update.

6. Optimize the menu bar edit, view, and function submenu functions.

7. Optimize some known UI restoration problems.

8. Optimize the network refresh problem of LAN devices.

9. Optimize known LAN operation and display problems.

10. Optimize known model operation and 3D rendering problems.

11. Optimize the model cutting and model lettering functions.

12. Optimize the user-specified Z seam and Z seam parameters.

13. Fix the known Sermoon D3 Pro slicing problem.

14. Fix the crash problem of imported printer parameters.

15. Fix the known slice crash problem.

16. Fixed the problem that CR-5 Pro and CR-5 Pro_H cannot be added.

17. Fix some problems of model download and download management.

18. Fix some problems of Creality Cloud login and Creality Cloud personal center.

19. Fix other known bugs.

New features:

1. Added functions for renaming, deleting G-code of LAN devices.

2. Added functions for renaming, deleting and sharing time-lapse photography files of LAN devices.

3. Added CR-10 SE and Ender-3 V3 KE printers.

4. Added 10 new sonic screen compatible printers.

5. Added Aligned Rectilinear filling method.

6. Added support judgment function when slicing.

7. Added G-code sharing function in crealitycloud Personal Center.

8. Added new prompts for models that are too large or too small when importing.

Optimization features:

1. Optimize the language and server selection when starting the software for the first time.

2. Optimize the update the slicing configuration of Ender-3 V3 SE, Ender-3 S1, Ender-3 S1 Pro, Ender-3 S1 Plus, Ender5 S1, K1, K1 Max, and Sermoon D3 Pro.

3. Optimize the temperature and flow preview of calibration function.

4. Optimize the large model import and slicing performance.

5. Optimize the the speed and success rate of tree support generation.

6. Optimize the the printing effect of the active model.

7. Optimize the top printing effect.

8. Optimize the accuracy of G-code printing information.

9. Optimize the temporary documents and project documents.

10. Optimize the interaction on the left operation bar.

11. Optimize the model download center sorting.

12. Optimize the LAN device status, network update, printing control.

Key bug fixes:

1. Fixed known slice stuck and crash issues.

2. Fix the problem of G-code file upload in LAN.

3. Fixed G-code file generation, saving and parsing issues.

4. Fixed CR-30 adhesion and slice display issues.

5. Fixed Sermoon D3 Pro printing logic and heating logic issues.

6. Fixed the clone function of Linux version.

7. Fixed the Mac version non-default Z-seam slicing crash, parameter configuration display, project file and model upload issues.

8. Fixed the problem of flattening the model.

9. Fix other known issues.

Creality Print V4.3.6 updates：

1. Added Sermoon M500 and Ender-3 V3 SE printers.

2. Added delete options for configuration files and downloaded models during overwriting installation.

3. Added the "Calibration" menu function.

4. Added "Standard Model" function in the file menu.

5. Added the import of STEP file format.

6. The help menu increases the "Mouse Operation Function".

7. Help - Use Course menu to update the user manual.

8. Added multiple mode previews and optimized the existing preview data.

9. LAN printing adds the export function of G-code and time-lapse photography files.

10. LAN printing adds the function of importing multiple files.

11. The LAN function of Sermoon D3 Pro has newly added the display and setting of the temperature of the left/right nozzle and the temperature of the chamber.

12. The k1/k1 max LAN function adds chamber fan control.

13. Optimize the G-code preview display and printer preview adaptation.

14. Optimization Model tree support and custom Z seam hidden .

15. The prompt optimization after the modification of slice configuration.

16. Optimization Sermoon D3 Pro dual-nozzle printing and K1/K1 Max high-speed printing effect .

17. Software version update detection mechanism and prompt optimization.

18. Optimization known problem of parameter system.

19. Other known bug fixed.

Creality Print v4.3.5.5769 changelist:

1. Optimize K1, K1 Max, Sermoon D3 Pro Printer， filament and slicing parameters.

2. Optimize known parameter system problems.

3. Optimize the G-code preview display problem of known printer.

4. Optimize the slice parameters of Ender-5 S1, Ender-3 S1, Ender-3 S1 Pro, and Sonic Pad printer.

5. Optimize some issues of version update.

6. Optimize the menu bar edit, view, and function submenu functions.

7. Optimize some known UI restoration problems.

8. Optimize the network refresh problem of LAN devices.

9. Optimize known LAN operation and display problems.

10. Optimize known model operation and 3D rendering problems.

11. Optimize the model cutting and model lettering functions.

12. Optimize the user-specified Z seam and Z seam parameters.

13. Fix the known Sermoon D3 Pro slicing problem.

14. Fix the crash problem of imported printer parameters.

15. Fix the known slice crash problem.

16. Fixed the problem that CR-5 Pro and CR-5 Pro_H cannot be added.

17. Fix some problems of model download and download management.

18. Fix some problems of Creality Cloud login and Creality Cloud personal center.

19. Fix other known bugs.