Ender-5 S1

Printer: Ender-5 S1

Printer Mainboard: V1.0.4

motherboard chip：STM32F401RET6

Notes:

This firmware is the factory firmware of Ender-5 S1. Supports automatic leveling and material breakage detection functions, and can switch nine languages (Chinese, English, Spanish, German, French, Russian, Portuguese, Italian, Turkish).

Display firmware update：

1. Format the TF card on the computer side, and select 4096 for the allocation unit size.

2. Put the file "private" and“DWIN_SET”、“firmware.zlib”into the TF card.

3. Turn off the printer and insert the TF card into the card slot on the back of the screen.

4. Reboot and wait for the update to finish.

5. After finishing the update, remove the TF card and delete the files inside.

Mainboard firmware update：

1. Format the SD card on the computer side, and select 32KB for the allocation unit size.

2. Put the firmware folder "TM32F4_UPDATE" into the SD card.

3. Turn off the printer and insert the TF card into the card slot on the motherboard.

4. Reboot and wait for the update to finish.

5. After the update is complete, take out the SD card and delete the folders inside.

After-sales video link：

https://www.crealitycloud.com/post-detail/63b7e22ae673a58c0a003025

Printer: Ender-5 S1

Printer Mainboard: V1.0.4

motherboard chip：STM32F401RET6

Notes:

This firmware is the factory firmware of Ender-5 S1. Supports automatic leveling and material breakage detection functions, and can switch nine languages (Chinese, English, Spanish, German, French, Russian, Portuguese, Italian, Turkish).

Display firmware update：

1. Format the TF card on the computer side, and select 4096 for the allocation unit size.

2. Put the file "private" and“DWIN_SET”into the TF card.

3. Turn off the printer and insert the TF card into the card slot on the back of the screen.

4. Reboot and wait for the update to finish.

5. After finishing the update, remove the TF card and delete the files inside.

Mainboard firmware update：

1. Format the SD card on the computer side, and select 32KB for the allocation unit size.

2. Put the firmware folder "TM32F4_UPDATE" into the SD card.

3. Turn off the printer and insert the TF card into the card slot on the motherboard.

4. Reboot and wait for the update to finish.

5. After the update is complete, take out the SD card and delete the folders inside.

After-sales video link：

https://www.crealitycloud.com/post-detail/63b7e22ae673a58c0a003025

Limit switch version with Z axis.

Printer: Ender-5 S1

Printer Mainboard: CR4NS200141C13

motherboard chip：STM32F401RET6

Notes:

This firmware is the factory firmware of Ender-5 S1. Supports automatic leveling and material breakage detection functions, and can switch nine languages (Chinese, English, Spanish, German, French, Russian, Portuguese, Italian, Turkish).

Display firmware update

1. Format the TF card on the computer side, and select 4096 for the allocation unit size.

2. Put the file "private" into the TF card.

3. Turn off the printer and insert the TF card into the card slot on the back of the screen.

4. Reboot and wait for the update to finish.

5. After finishing the update, remove the TF card and delete the files inside.

Mainboard firmware update：

1. Format the SD card on the computer side, and select 32KB for the allocation unit size.

2. Put the firmware folder "TM32F4_UPDATE" into the SD card.

3. Turn off the printer and insert the TF card into the card slot on the motherboard.

4. Reboot and wait for the update to finish.

5. After the update is complete, take out the SD card and delete the folders inside.

Mainboard Version: CR4NS200141C13