V1.2.1.0 version firmware update instructions

1. Optimized error 2527.

2. Optimize font display issues.

3. Modify the fan motherboard logic.

4. Resolved issues with Creality Print slicer file preview images not displaying.

5. Optimize silent printing parameter configuration.

6. Add root account information page.

7. Built-in Gcode file update.

8. Modify configuration parameters to optimize first-layer printing.

9. Temperature sensor set to a minimum of -15 degrees Celsius to prevent the machine from reporting errors due to cold conditions in some areas.

10. Optimize the UI interface operation logic.

11. Optimize other known bugs.

Creality Print V4.3.8.7058 Update Notes:

1. New model CT-V5.

2. New model GS-02.

3. Update K1C printing parameters.

4. Enable wiping on the remote model.

5. Optimize the starting point of the wiping path.

6. Optimized support removable.

7. Optimize the remote retrieval configuration of ender3 and ender3 v2 models.

8. Optimize the remote drawing problem of ender3 and ender v2 machine printing.

9. Modified model sizes of CT-300D and CT-V5.

10. Repair the abnormal wiring on the top surface of the support.

11. Fix translation issues.

12. Fix parameter coverage problem.

13. Fix D3pro dual-nozzle printing bug.

14. Fix some bugs.

New printers:

1. Added Nebula screen category and 4 compatible printers (Ender-3 V2, Ender-3 V2 Neo, Ender-3 Pro, Ender-3).

2. Added 6 new sonic screen compatible printers (Ender-2 Pro, Ender-3 Pro, CR-10, CR-10S V2, CR-200B, Sermoon D1).

3. Added Ender-3 V3, K1C, CR-1000S, GS-01 printers.

new features:

1. Added Korean adaptation.

2. Added slicing progress bar information display.

3. Add object exclusion function.

4. Add a sorting function to the file list on the LAN device details page.

5. Progress display when exporting LAN files.

6. Matching of G-code and machine model when printing on LAN.

7. The wall printing sequence adds a flexible wall printing sequence(for drape, use the inner wall first and then the outer wall, and for others, use the outer wall first and then the inner wall).

Optimization features:

1. Improve the LAN printing function.

2. Accurately match the model fan/side fan/back fan/LED light function information with the printer.

3. Optimized the wiping printing path algorithm.

4. Optimize suspension deceleration algorithm.

5. Optimize model layout function algorithm.

6. Optimize the maximum number of model clones.

7. Optimize the model lettering function algorithm.

8. Optimize system memory usage.

9. Improve model rendering performance.

Key bug fixes:

1. Fixed the problem that the positioning device cannot be found after the IP of the LAN device is changed.

2. Fixed the problem of slice preview playback.

3. Fixed calibration-temperature tower preview abnormality problem.

4. Fixed the issue where the G-code preview information during slice preview is 0.

5. Fixed the issue where the slice continues to prompt for support when supports have been added.

6. Fixed the problem of missing steps when printing model slices when dither speed control is enabled.

7. Fixed the problem of abnormal display of slice preview support.

8. Fix other known issues.

New features:

1. Added functions for renaming, deleting G-code of LAN devices.

2. Added functions for renaming, deleting and sharing time-lapse photography files of LAN devices.

3. Added CR-10 SE and Ender-3 V3 KE printers.

4. Added 10 new sonic screen compatible printers.

5. Added Aligned Rectilinear filling method.

6. Added support judgment function when slicing.

7. Added G-code sharing function in crealitycloud Personal Center.

8. Added new prompts for models that are too large or too small when importing.

Optimization features:

1. Optimize the language and server selection when starting the software for the first time.

2. Optimize the update the slicing configuration of Ender-3 V3 SE, Ender-3 S1, Ender-3 S1 Pro, Ender-3 S1 Plus, Ender5 S1, K1, K1 Max, and Sermoon D3 Pro.

3. Optimize the temperature and flow preview of calibration function.

4. Optimize the large model import and slicing performance.

5. Optimize the the speed and success rate of tree support generation.

6. Optimize the the printing effect of the active model.

7. Optimize the top printing effect.

8. Optimize the accuracy of G-code printing information.

9. Optimize the temporary documents and project documents.

10. Optimize the interaction on the left operation bar.

11. Optimize the model download center sorting.

12. Optimize the LAN device status, network update, printing control.

Key bug fixes:

1. Fixed known slice stuck and crash issues.

2. Fix the problem of G-code file upload in LAN.

3. Fixed G-code file generation, saving and parsing issues.

4. Fixed CR-30 adhesion and slice display issues.

5. Fixed Sermoon D3 Pro printing logic and heating logic issues.

6. Fixed the problem of flattening the model.

7. Fixed notebook windows 11 system and 4K resolution compatibility issues.

8. Fixed parameter linkage, operation, ineffectiveness and translation issues of the parameter system.

9. Fix other known issues.

Creality Print V4.3.6.6242 updates:

1. Added Sermoon M500 and Ender-3 V3 SE printers.

2. Added delete options for configuration files and downloaded models during overwriting installation.

3. Added the "Calibration" menu function.

4. Added "Standard Model" function in the file menu.

5. Added the import of STEP file format.

6. The help menu increases the "Mouse Operation Function".

7. Help - Use Course menu to update the user manual.

8. Added multiple mode previews and optimized the existing preview data.

9. LAN printing adds the export function of G-code and time-lapse photography files.

10. LAN printing adds the function of importing multiple files.

11. The LAN function of Sermoon D3 Pro has newly added the display and setting of the temperature of the left/right nozzle and the temperature of the chamber.

12. The k1/k1 max LAN function adds chamber fan control.

13. Optimize the G-code preview display and printer preview adaptation.

14. Optimization Model tree support and custom Z seam hidden .

15. The prompt optimization after the modification of slice configuration.

16. Optimization Sermoon D3 Pro dual-nozzle printing and K1/K1 Max high-speed printing effect .

17. Software version update detection mechanism and prompt optimization.

18. Optimization known problem of parameter system.

19. Other known bug fixed.

Creality Print V4.3.6.6200 updates:

1. Added Sermoon M500 and Ender-3 V3 SE printers.

2. Added delete options for configuration files and downloaded models during overwriting installation.

3. Added the "Calibration" menu function.

4. Added "Standard Model" function in the file menu.

5. Added the import of STEP file format.

6. The help menu increases the "Mouse Operation Function".

7. Help - Use Course menu to update the user manual.

8. Added multiple mode previews and optimized the existing preview data.

9. LAN printing adds the export function of G-code and time-lapse photography files.

10. LAN printing adds the function of importing multiple files.

11. The LAN function of Sermoon D3 Pro has newly added the display and setting of the temperature of the left/right nozzle and the temperature of the chamber.

12. The k1/k1 max LAN function adds chamber fan control.

13. Optimize the G-code preview display and printer preview adaptation.

14. Optimization Model tree support and custom Z seam hidden .

15. The prompt optimization after the modification of slice configuration.

16. Optimization Sermoon D3 Pro dual-nozzle printing and K1/K1 Max high-speed printing effect .

17. Software version update detection mechanism and prompt optimization.

18. Optimization known problem of parameter system.

19. Other known bug fixed.

Creality Print v4.3.5.5769 changelist:

1. Optimize K1, K1 Max, Sermoon D3 Pro Printer， filament and slicing parameters.

2. Optimize known parameter system problems.

3. Optimize the G-code preview display problem of known printer.

4. Optimize the slice parameters of Ender-5 S1, Ender-3 S1, Ender-3 S1 Pro, and Sonic Pad printer;

5. Optimize some issues of version update.

6. Optimize the menu bar edit, view, and Tools submenu functions.

7. Optimize some known UI restoration problems.

8. Optimize the network refresh problem of LAN devices.

9. Optimize known LAN operation and display problems.

10. Optimize known model operation and 3D rendering problems.

11. Optimize the model cutting and model lettering functions.

12. Optimize the user-specified Z seam and Z seam parameters.

13. Fix the known Sermoon D3 Pro slicing problem.

14. Fix the crash problem of imported printer parameters.

15. Fix the known slice crash problem.

16. Fixed the problem that CR-5Pro and CR-5Pro-H cannot be added.

17. Fix some problems of model download and download management.

18. Fix some problems of Creality Cloud login and Creality Cloud personal center.

19. Fix other known bugs.

New printers:

1. Added Nebula screen category and 4 compatible printers (Ender-3 V2, Ender-3 V2 Neo, Ender-3 Pro, Ender-3).

2. Added 6 new sonic screen compatible printers (Ender-2 Pro, Ender-3 Pro, CR-10, CR-10S V2, CR-200B, Sermoon D1).

3. Added Ender-3 V3, K1C, CR-1000S, GS-01 printers.

new features:

1. Added Korean adaptation.

2. Added slicing progress bar information display.

3. Add object exclusion function.

4. Add a sorting function to the file list on the LAN device details page.

5. Progress display when exporting LAN files.

6. Matching of G-code and machine model when printing on LAN.

7. The wall printing sequence adds a flexible wall printing sequence(for drape, use the inner wall first and then the outer wall, and for others, use the outer wall first and then the inner wall).

Optimization features:

1. Improve the LAN printing function.

2. Accurately match the model fan/side fan/back fan/LED light function information with the printer.

3. Optimized the wiping printing path algorithm.

4. Optimize suspension deceleration algorithm.

5. Optimize model layout function algorithm.

6. Optimize the maximum number of model clones.

7. Optimize the model lettering function algorithm.

8. Optimize system memory usage.

9. Improve model rendering performance.

Key bug fixes:

1. Fixed the problem that the positioning device cannot be found after the IP of the LAN device is changed.

2. Fixed the problem of slice preview playback.

3. Fixed calibration-temperature tower preview abnormality problem.

4. Fixed the issue where the G-code preview information during slice preview is 0.

5. Fixed the issue where the slice continues to prompt for support when supports have been added.

6. Fixed the problem of missing steps when printing model slices when dither speed control is enabled.

7. Fixed the problem of abnormal display of slice preview support.

8. Fix other known issues.

New features:

1. Added functions for renaming, deleting G-code of LAN devices.

2. Added functions for renaming, deleting and sharing time-lapse photography files of LAN devices.

3. Added CR-10 SE and Ender-3 V3 KE printers.

4. Added 10 new sonic screen compatible printers.

5. Added Aligned Rectilinear filling method.

6. Added support judgment function when slicing.

7. Added G-code sharing function in crealitycloud Personal Center.

8. Added new prompts for models that are too large or too small when importing.

Optimization features:

1. Optimize the language and server selection when starting the software for the first time.

2. Optimize the update the slicing configuration of Ender-3 V3 SE, Ender-3 S1, Ender-3 S1 Pro, Ender-3 S1 Plus, Ender5 S1, K1, K1 Max, and Sermoon D3 Pro.

3. Optimize the temperature and flow preview of calibration function.

4. Optimize the large model import and slicing performance.

5. Optimize the the speed and success rate of tree support generation.

6. Optimize the the printing effect of the active model.

7. Optimize the top printing effect.

8. Optimize the accuracy of G-code printing information.

9. Optimize the temporary documents and project documents.

10. Optimize the interaction on the left operation bar.

11. Optimize the model download center sorting.

12. Optimize the LAN device status, network update, printing control.

Key bug fixes:

1. Fixed known slice stuck and crash issues.

2. Fix the problem of G-code file upload in LAN.

3. Fixed G-code file generation, saving and parsing issues.

4. Fixed CR-30 adhesion and slice display issues.

5. Fixed Sermoon D3 Pro printing logic and heating logic issues.

6. Fixed the clone function of Linux version.

7. Fixed the Mac version non-default Z-seam slicing crash, parameter configuration display, project file and model upload issues.

8. Fixed the problem of flattening the model.

9. Fix other known issues.

Creality Print V4.3.6 updates：

1. Added Sermoon M500 and Ender-3 V3 SE printers.

2. Added delete options for configuration files and downloaded models during overwriting installation.

3. Added the "Calibration" menu function.

4. Added "Standard Model" function in the file menu.

5. Added the import of STEP file format.

6. The help menu increases the "Mouse Operation Function".

7. Help - Use Course menu to update the user manual.

8. Added multiple mode previews and optimized the existing preview data.

9. LAN printing adds the export function of G-code and time-lapse photography files.

10. LAN printing adds the function of importing multiple files.

11. The LAN function of Sermoon D3 Pro has newly added the display and setting of the temperature of the left/right nozzle and the temperature of the chamber.

12. The k1/k1 max LAN function adds chamber fan control.

13. Optimize the G-code preview display and printer preview adaptation.

14. Optimization Model tree support and custom Z seam hidden .

15. The prompt optimization after the modification of slice configuration.

16. Optimization Sermoon D3 Pro dual-nozzle printing and K1/K1 Max high-speed printing effect .

17. Software version update detection mechanism and prompt optimization.

18. Optimization known problem of parameter system.

19. Other known bug fixed.

Creality Print v4.3.5.5769 changelist:

1. Optimize K1, K1 Max, Sermoon D3 Pro Printer， filament and slicing parameters.

2. Optimize known parameter system problems.

3. Optimize the G-code preview display problem of known printer.

4. Optimize the slice parameters of Ender-5 S1, Ender-3 S1, Ender-3 S1 Pro, and Sonic Pad printer.

5. Optimize some issues of version update.

6. Optimize the menu bar edit, view, and function submenu functions.

7. Optimize some known UI restoration problems.

8. Optimize the network refresh problem of LAN devices.

9. Optimize known LAN operation and display problems.

10. Optimize known model operation and 3D rendering problems.

11. Optimize the model cutting and model lettering functions.

12. Optimize the user-specified Z seam and Z seam parameters.

13. Fix the known Sermoon D3 Pro slicing problem.

14. Fix the crash problem of imported printer parameters.

15. Fix the known slice crash problem.

16. Fixed the problem that CR-5 Pro and CR-5 Pro_H cannot be added.

17. Fix some problems of model download and download management.

18. Fix some problems of Creality Cloud login and Creality Cloud personal center.

19. Fix other known bugs.

New features:

1. Added functions for renaming, deleting G-code of LAN devices.

2. Added functions for renaming, deleting and sharing time-lapse photography files of LAN devices.

3. Added CR-10 SE and Ender-3 V3 KE printers.

4. Added 10 new sonic screen compatible printers.

5. Added Aligned Rectilinear filling method.

6. Added support judgment function when slicing.

7. Added G-code sharing function in crealitycloud Personal Center.

8. Added new prompts for models that are too large or too small when importing.

Optimization features:

1. Optimize the language and server selection when starting the software for the first time.

2. Optimize the update the slicing configuration of Ender-3 V3 SE, Ender-3 S1, Ender-3 S1 Pro, Ender-3 S1 Plus, Ender5 S1, K1, K1 Max, and Sermoon D3 Pro.

3. Optimize the temperature and flow preview of calibration function.

4. Optimize the large model import and slicing performance.

5. Optimize the the speed and success rate of tree support generation.

6. Optimize the the printing effect of the active model.

7. Optimize the top printing effect.

8. Optimize the accuracy of G-code printing information.

9. Optimize the temporary documents and project documents.

10. Optimize the interaction on the left operation bar.

11. Optimize the model download center sorting.

12. Optimize the LAN device status, network update, printing control.

Key bug fixes:

1. Fixed known slice stuck and crash issues.

2. Fix the problem of G-code file upload in LAN.

3. Fixed G-code file generation, saving and parsing issues.

4. Fixed CR-30 adhesion and slice display issues.

5. Fixed Sermoon D3 Pro printing logic and heating logic issues.

6. Fixed the clone function of Linux version.

7. Fixed the Mac version non-default Z-seam slicing crash, parameter configuration display, project file and model upload issues.

8. Fixed the problem of flattening the model.

9. Fix other known issues.

Creality Print V4.3.6 updates：

1. Added Sermoon M500 and Ender-3 V3 SE printers.

2. Added delete options for configuration files and downloaded models during overwriting installation.

3. Added the "Calibration" menu function.

4. Added "Standard Model" function in the file menu.

5. Added the import of STEP file format.

6. The help menu increases the "Mouse Operation Function".

7. Help - Use Course menu to update the user manual.

8. Added multiple mode previews and optimized the existing preview data.

9. LAN printing adds the export function of G-code and time-lapse photography files.

10. LAN printing adds the function of importing multiple files.

11. The LAN function of Sermoon D3 Pro has newly added the display and setting of the temperature of the left/right nozzle and the temperature of the chamber.

12. The k1/k1 max LAN function adds chamber fan control.

13. Optimize the G-code preview display and printer preview adaptation.

14. Optimization Model tree support and custom Z seam hidden .

15. The prompt optimization after the modification of slice configuration.

16. Optimization Sermoon D3 Pro dual-nozzle printing and K1/K1 Max high-speed printing effect .

17. Software version update detection mechanism and prompt optimization.

18. Optimization known problem of parameter system.

19. Other known bug fixed.

Creality Print v4.3.5.5769 changelist:

1. Optimize K1, K1 Max, Sermoon D3 Pro Printer， filament and slicing parameters.

2. Optimize known parameter system problems.

3. Optimize the G-code preview display problem of known printer.

4. Optimize the slice parameters of Ender-5 S1, Ender-3 S1, Ender-3 S1 Pro, and Sonic Pad printer.

5. Optimize some issues of version update.

6. Optimize the menu bar edit, view, and function submenu functions.

7. Optimize some known UI restoration problems.

8. Optimize the network refresh problem of LAN devices.

9. Optimize known LAN operation and display problems.

10. Optimize known model operation and 3D rendering problems.

11. Optimize the model cutting and model lettering functions.

12. Optimize the user-specified Z seam and Z seam parameters.

13. Fix the known Sermoon D3 Pro slicing problem.

14. Fix the crash problem of imported printer parameters.

15. Fix the known slice crash problem.

16. Fixed the problem that CR-5 Pro and CR-5 Pro_H cannot be added.

17. Fix some problems of model download and download management.

18. Fix some problems of Creality Cloud login and Creality Cloud personal center.

19. Fix other known bugs.