Creality Raptor Series

1.3.4 firmware Update Notes:

1. Solve the problem that the laser does not light up when the parallel line cuts the cross line.

2. Solve the problem that the fan keeps running after stopping scanning, and change it to stop the fan within one minute after stopping the flow.

3. Solve the problem that the black object of RGB mapping is purple.

4. Optimize the single-click response speed of the scanner.

1.3.3 firmware Update Notes:

1. Solve the problem of occasional non-response when the button is pressed briefly.

2. Solve the problem of low RGB brightness.

3. Solve the problem of unequal IR image frame rates corresponding to the left and right lasers of the cross line after turning on RGB.

Optimize scanner accuracy.

This firmware needs to be used with Creality Scan version V3.1.28 software.

V3.3.25 Software Update Notes:

1. Added German, Spanish, and Portuguese languages.

2. Added the function of Continue Scanning.

3. Optimized the issue of frame rate degradation during long-duration scans (laser scanning mode).

4. Improved the edge of the mesh.

5. Improved the quality of merge in laser mode.

6. Added the function of Mesh Smooth to the edit page.

7. Added the function of cancel during simplification、mesh smooth and hole filling.

8. Optimized Raptor laser scanning distance prompts.

9. Added the guide for GPU driver update.

10. Changed to static IP port to solve the problem of rescanning the QR code after adding a new scan during the wireless scanning.

11. Added the option to click with the right mouse button to choose to rename, delete, continue scanning, and un-merge in the multi-project panel.

12. Fixed some bugs.

V3.3.20 Software Update Notes:

1. Added German, Spanish, and Portuguese languages.

2. Added the function of Continue Scanning.

3. Optimized the issue of frame rate degradation during long-duration scans (laser scanning mode).

4. Improved the edge of the mesh.

5. Improved the quality of merge in laser mode.

6. Added the function of Mesh Smooth to the edit page.

7. Added the function of cancel during simplification、mesh smooth and hole filling.

8. Optimized Raptor laser scanning distance prompts.

9. Added the guide for GPU driver update.

10. Fixed some bugs.

V3.3.4 Software Update Notes:

1. Improve user experience.

CrealityScan V3.3.1 Software Update Notes:

1. Added new software functions for RaptorX, including point cloud scanning for cross line, global marker scanning, and local detail scanning.

2. Supported wireless scanning with Scan Bridge for model RaptorX/Raptor/Otter.

3. Added screen mirroring function for wireless scanning by Scan Bridge for RaptorX/Raptor/Otter model.

4. Added marker merging function.

5.Added the function to merge point cloud data with different resolution.

6.Added a link of the Release Note in the software version description.

7.Adjusted the zoom range of the scanner's buttons.

8.Updated the contents of Get Start.

9.Fixed some bugs.

CrealityScan V3.2.46 Software Update Notes:

1. Fixed GPU compatibility issues for certain models of computers.

V3.3.20 Software Update Notes:

1. Added German, Spanish, and Portuguese languages.

2. Added the function of Continue Scanning.

3. Optimized the issue of frame rate degradation during long-duration scans (laser scanning mode).

4. Improved the edge of the mesh.

5. Improved the quality of merge in laser mode.

6. Added the function of Mesh Smooth to the edit page.

7. Added the function of cancel during simplification、mesh smooth and hole filling.

8. Optimized Raptor laser scanning distance prompts.

9. Added the guide for GPU driver update.

10. Fixed some bugs.

V3.3.4 Software Update Notes:

1. Added new software functions for RaptorX, including point cloud scanning for cross line, global marker scanning, and local detail scanning.

2. Supported wireless scanning with Scan Bridge for model RaptorX/Raptor/Otter.

3. Added screen mirroring function for wireless scanning by Scan Bridge for RaptorX/Raptor/Otter model.

4. Added marker merging function.

5.Added the function to merge point cloud data with different resolution.

6.Added a link of the Release Note in the software version description.

7.Adjusted the zoom range of the scanner's buttons.

8.Updated the contents of Get Start .

9.Fixed some bugs.

V3.2.47 Update Notes:

1. Improved point cloud processing time.

2. Add a cancel option during optimization.

3. Add notification sound for successful or failed processing.

4. Add parameter settings of each point cloud for batch processing.

5. Add exclude flat base option on scanning configuration page.

6. Intuitive exposure settings.

7. Add device factory reset.

8. Optimize point display size when zooming in and out in manual merging view.

9. UI optimization.

10. Fixed some bugs.

11. Fix the issue of one laser not turning on in Raptor infrared mode.

V3.2.16 Update Notes:

1. Add One-click to third-party software (Creality Print and HALOT BOX).

2. Speed up model loading.

3. Improve graphics card compatibility.

4. Improve the blue laser mode scanning experience of CR-Scan Raptor.

5. Fix bugs.