Creality's Next-Gen Nozzle Changing
Experiencing multicolor, multi-material 3D printing in a brand-new fashion — print faster without waste and hassle-free in one go.
Higher speed. Zero waste. Zero hassle.
The next-gen nozzle-changing system from Creality enables ultra-fast 5s switching
between nozzles and less than 15s switching between colors and materials, with
virtually zero waste, unlocking true print-in-place models. The possibility of
multiple properties built in a single print now sets a completely new standard.
Time Saving
Waste Free
0Filament PurgesMaintenance Fast
-25%Replacement TimeCost Efficient
-75%Replacement CostKliTekâ„¢ features multiple filament channels, eliminating repeated retraction
and reloading when switching colors or materials. Turning purge waste
into a thing of the past — aside from a minimal prime tower
— it can reduce total filament usage by up to 80% per print.
* Data from Creality Lab.
Users can easily replace the nozzle assembly by removing
two screws and unplugging the USB-C cable.
Compared to more bulky tool-changing solutions, KliTekâ„¢ reduces costs by up to 4.5x through nozzle-assembly-only replacement.
* Comparison of part replacement cost. Nozzle assembly vs. toolhead.
Nozzle assembly pricing is subject to change.
30% increase in structural strength and rigidity, achieved through advanced computational simulation.
Precise XYZ repositioning (≤ 25 μm) after nozzle changes.
A network of 37 sensors — including 12 dedicated to the tool-changing process — ensures real-time precision.
Pinpoint extrusion control for superior print quality. In-house designed H-Bridge delivers system-level optimization, with noise reduced by 7 dB.
We Print TPU
Achieve multicolor TPU in a single print.
Combine multiple material properties in one print.
Reliably print TPU as soft as 80A Shore hardness.
While most consumer systems struggle to hit a 10% success rate with TPU 85A, KliTek™ triples the industry standard with a continuous 3 mm³/s flow. The gap widens with TPU 95A — KliTek™ achieves a whopping 15 mm³/s — up to 7x the speed of conventional printers that stall at 2–3 mm³/s.
* 15 mm³/s tested in Creality Lab with TPU 95A filament.
Automatically identifies the color and material type via Creality RFID filament.
Pulls and pushes the elastic TPU to roam through the feed tube like a caterpillar.
Advanced algorithms for TPU stringing control, multi-material interlayer bonding, and support printing.
FOC step-servo motors deliver precision control, while high-flow nozzles enable faster printing.
Blending cyan, magenta, yellow, and white (or black),
CMYK 3D printing reveals the full color spectrum.
KliTekâ„¢ takes it a step further by eliminating waste,
placing every color exactly where it's needed
— without compromise.
Mixing nozzles for printing — a 0.4 mm nozzle prints outer walls for detail retention, while a 0.8 mm nozzle accelerates infill printing. All parameters are optimized in Creality Print.
Creality's Next-Gen
Nozzle-Changing 3D Printer with KliTekâ„¢
Be the first to know Creality's nozzle-changing
tech and latest innovations.
