Follow this operation manual.
CR-Laser Falcon (10W) Unboxing and Installation
1.Before engraving, place a flat object that cannot be penetrated by the laser, such as an aluminum alloy or stainless steel plate on the workbench, and then place processing material.
2.Move a gcode file to the root directory of the TF card.
If you use Win7 system and the corresponding COM port of the engraving machine cannot be identify automatically, please unzip the package and install the driver in the device manager manually.
Follow this LaserGRBL-User Guide.
Follow this LightBurn-User Guide.
V3.0.24
1、Change: the way of open laser power
2、Add: change machine parameter and save parameter
3、Add: Automatic identification device function of lightburn software