Follow this operation manual.
Steller applicable model and motherboard version
Model: CR-10 Smart Pro
Software version: v1.0.14
Motherboard Silk Printing: CR-FDM-V2.5.S1_100
illustrate: The firmware modified the problem of the mobile shaft XYZ direction.
Screen update instructions:
1. Format the TF card on the computer, and select 4096 to allocate the size of the unit.
2. Put dwin_set、private into the memory card.
3. Turn off the printer and insert the memory card into the screen card slot.
4. Restart and wait for the update.
5. After completing the update, remove the TF card and delete the file inside.
Motherboard update:
1. Format the TF card on the computer, and select 4096 to allocate the size of the unit.
2. Put the firmware file "CR-10 SMART PROMARLIN2.0.6V1.0.14.bin" into the memory card (this step is necessary, please pay attention).
3. Turn off the printer and insert the memory card into the machine card slot.
4. Restart and wait for the update.
5. After completing the update, take out the TF card and delete the bin file inside.
Steller applicable model and motherboard version
Printer model: CR-10 Smart Pro
Software version: v1.0.14
Motherboard Silk Printing: CR-FDM-V2.5.S1_401
illustrate: The firmware optimizes the UI PID control page font size.
Screen update instructions:
1. Format the TF card on the computer, and select 4096 to allocate the size of the unit.
2. Put dwin_set、private into the memory card.
3. Turn off the printer and insert the memory card into the screen card slot.
4. Restart and wait for the update.
5. After completing the update, remove the TF card and delete the file inside.
Motherboard update:
1. Format the TF card on the computer, and select 4096 to allocate the size of the unit.
2. Put the folder file "STM32F4_update" folder into the memory card (this step is necessary, please pay attention).
3. Turn off the printer and insert the memory card into the machine card slot.
4. Restart and wait for the update.
5. After completing the update, take out the TF card and delete the bin file inside.
Mainboard Version: V2.5.S1_100
