Question 1

Why does the slicing software always show a failure during installation?

Accepted Answer

1. Confirm whether it is installed on the C drive of the computer; 2. The software is incompatible with the computer system, try again after replacing other software.

Question 2

What happened to the temperature fluctuation of the nozzle?

Accepted Answer

Please check whether the thermistor is loose. If yes, re-insert the wiring. If the problem still exists, please contact the after-sales customer service.

Question 3

What should I do if the fan does not rotate or there is noise?

Accepted Answer

1. Clean the fan and check whether there is debris interference ; 2. Check whether the screws and fan cover are loose, and then re-fix it; 3. Check if the fan blade is damaged or broken, please replace a new fan.

Question 4

How do I troubleshoot common printing problems?

Accepted Answer

Common issues like warping, stringing, or layer misalignment can be resolved by adjusting bed leveling, modifying slicer settings, or cleaning the nozzle. The AI monitoring helps identify problems early, reducing wasted filament and time.

Question 5

What file transfer methods are supported by the Ender-3 V3 KE?

Accepted Answer

The Ender-3 V3 KE supports file transfer via USB drive, LAN connection, and the Creality Cloud app.

Question 6

What is the build volume of the Ender-3 V3 KE?

Accepted Answer

Ender-3 V3 SE offers a maximum build volume of 220 × 220 × 240mm.

Question 7

What is the maximum heatbed temperature?

Accepted Answer

The heatbed can reach up to 100°C on the Ender-3 V3 KE.

Question 8

How much does the Ender-3 V3 KE weigh?

Accepted Answer

The Ender-3 V3 KE has a net weight of 7.34 kg. Including the packaging and accessories, the gross weight is less than 9.18 kg.

Question 9

Which filaments are compatible with the Ender-3 V3 KE?

Accepted Answer

The Ender-3 V3 KE is compatible with most common FDM filaments, including PLA, PETg,ABS,TPU(95A) and ASA.

Ender-3 V3 KE

サポート

Ender-3 V3 KE

製品サービス