Ender-3 V3 KE
فيديوهات
معامل
تحميل
مركز المساعدة
خدمة المنتج
المعاملات
Core Specifications
Supported Filaments
PLA, PETG, ABS, TPU(95A), ASA
Filament Diameter
1.75 mm
Heatbed Temperature
≤ 100 ℃
Nozzle Temperature
≤ 300 °C
Nozzle Material
Nozzle Diameter
0.4 mm
Hotend Material
Extruder
Upgraded "Sprite" direct drive extrusion
Motion System
Step-servo motors for the X/Y axes; stepper motor for others
Acceleration
8000 mm/s²
Printing Speed
500 mm/s
Layer Height
0.1-0.35 mm
Printing Accuracy
100±0.1 mm
Printing Technology
FFF
Supported Filaments
PLA, PETG, ABS, TPU(95A), ASA
Filament Diameter
1.75 mm
Heatbed Temperature
≤ 100 ℃
Nozzle Temperature
≤ 300 °C
Nozzle Material
Nozzle Diameter
0.4 mm
Hotend Material
Extruder
Upgraded "Sprite" direct drive extrusion
Motion System
Step-servo motors for the X/Y axes; stepper motor for others
Acceleration
8000 mm/s²
Printing Speed
500 mm/s
Layer Height
0.1-0.35 mm
Printing Accuracy
100±0.1 mm
Printing Technology
FFF
Functionality
Lighting Kit
RFID Sensor in Printer
Air Filter
Chamber Temperature
Auto Filament Relay
Power Loss Recovery
Filament Run-Out Sensor
Rated Power & Voltage
Remote Control
Display Screen
4.3" Color Touch Screen
AI Camera for Calibration (Timelapse supported)
Al Camera for Monitoring (Timelapse supported)
Input Shaping
Yes
Leveling Mode
Auto Leveling
Lighting Kit
RFID Sensor in Printer
Air Filter
Chamber Temperature
Auto Filament Relay
Power Loss Recovery
Filament Run-Out Sensor
Rated Power & Voltage
Remote Control
Display Screen
4.3" Color Touch Screen
AI Camera for Calibration (Timelapse supported)
Al Camera for Monitoring (Timelapse supported)
Input Shaping
Yes
Leveling Mode
Auto Leveling
Show More
عرض الكل
تحميل
مركز المساعدة
الأسئلة الشائعة
أسئلة عامة
Why does the slicing software always show a failure during installation?
1. Confirm whether it is installed on the C drive of the computer; 2. The software is incompatible with the computer system, try again after replacing other software.
What happened to the temperature fluctuation of the nozzle?
What should I do if the fan does not rotate or there is noise?
How do I troubleshoot common printing problems?
عرض الكل
خدمة المنتج
عرض الكل