K2 Plus

V1.1.2.10 Firmware Update Notes:

1. Fixed known issues to improve user experience and product stability.

V1.1.2.6 Firmware Update Notes:

1. When leveling data already exists and the Z motor is not unlocked, selecting "Print Calibration" in the next task will only detect the model area, reducing print startup time.

2. Optimized multi-color printing flushing logic to improve print quality.

3. Optimized extruder jam detection, improving detection accuracy and reducing false alarms.

4. Optimized belt tensioning module logic, enhancing belt tensioning performance.

5. Improved Z-axis direction recovery after power loss.

6. Default to disabling CFS startup insertion detection feature.

7. Added maintenance reminder feature. When the machine reaches a certain trigger threshold, a pop-up reminder will appear on the screen, and users can scan a QR code to view maintenance steps.

8. Optimized video connection stability in the Creality Cloud App under mobile networks.

9. Optimized flow ratio calibration for improved accuracy.

10. Fixed the issue of print pause and cancel failures caused by printing beyond the range.

11. Added a constant temperature phase when the heated bed temperature exceeds 60°C to improve leveling of high-temperature filaments and improve first-layer print quality.

12. Optimized pre-print zeroing logic by first wiping the nozzle to prevent material residue from remaining on the print bed during zeroing.

13. Fixed known issues to improve user experience and product stability.

V1.1.1.7 Firmware Update Notes:

1. Optimized bed heating logic for first leveling after restart.

2. Fixed the 2060 error caused by abnormal object exclusion commands in gcode files.

3. Updated built-in print files to resolve issues with purge length.

4. Fixed known issues to further enhance user experience and product stability.

1.1.0.65 Firmware Update Notes:

1. Added AI waste chute blockage detection feature.

2. Flow ratio calibration now supports PLA, PLA-CF, PETG, ABS, TPU, PC, PA-CF, PA, and ASA.

3. Added E-axis extruder control buttons on the axis movement page.

4. Move AI features page and rename to "Print Settings."

5. Settings page reorganized into "General," "System," "Network," and "Account."

6. Self-check page moved to "Calibration"; fan control accessed via movement/temperature page icon.

7. Help page updated to show Wiki QR code directly, removing the FAQ section.

8. New help button in error popup with QR code for quick assistance.

9. Fixed Y-axis limit issues during flushing.

10. Fixed Chinese Wi-Fi name connection issue.

1.1.0.57 Firmware Update Notes:

1. When resuming after a power outage on the spoolholder slot, filament flush will be performed before resuming.

2. Added a beeper effect when the spoolholder slot reads the RFID.

3. Fixed an issue where switching materials caused the fan to shut off early, affecting the print quality of large multi-color PLA models.

4. Modified the temperature waiting action, fixing the issue of long nozzle heating time before the T command.

5. Optimized the logic for triggering the filament tensioning action, now only activated when the machine is idle or after a filament outage is detected.

6. Synchronized the fix where after ending a print（in case of filament outage）, the filament table and material information would not update.

7. Restored pre-factory reset check to detect whether the extruder has filament and provide a prompt.