Creality Hi Combo Hot Sale
Follow this operation manual.
Printer: Ender-3 S1 Pro
Motherboard main control chip version: STM32F401
Notes:
The firmware is Ender-3 S1 Pro update version, Supports Japanese and Korean, support adding laser printing module, after updating, you can switch between Fused deposition modeling and laser printing. Please confirm the main control chip model before updating the firmware, only support the model whose main control chip is F401 version.
Firmware update contents:
1. New model picture preview function.
2. Support high-speed printing (160mm/s) & optimization of vibration pattern.
3. Support automatic PID setting.
4. Display/edit leveling data.
Display firmware update：
1. Format the TF card on the computer side, and select 4096 for the allocation unit size.
2. Put the file "private" 、“DWIN_SET”and “firmware.zlib”into the TF card at the same time.
3. Turn off the printer and insert the TF card into the card slot on the back of the screen.
4. Reboot and wait for the update to finish.
5. After finishing the update, remove the TF card and delete the files inside.
Mainboard firmware update：
1. Format the SD card on the computer side, and select 4096 for the allocation unit size.
2. Put the STM32F4_UPDATE folder into the SD card (THIS STEP IS REQUIRED， PLEASE NOTE！).
3. Turn off the printer and insert the SD card into the card slot on the motherboard.
4. Reboot and wait for the update to finish.
5. After finishing the update, remove the SD card from the motherboard slot and delete file inside.
video tutorial：
https://www.crealitycloud.com/post-detail/6260f8046a165bebd55811fb
Printer: Ender-3 S1 Pro
Printer Mainboard: V2.4
Notes:
This is the special firmware for Ender-3 S1 Pro, which Supports adding CV-Laser Module, and automatic switching between Fused deposition modeling and laser printing.
Display firmware update：
1. Format the TF card on the computer side, and select 4096 for the allocation unit size.
2. Put the file "private" and “DWIN_SET”into the TF card at the same time.
3. Turn off the printer and insert the TF card into the card slot on the back of the screen.
4. Reboot and wait for the update to finish.
5. After finishing the update, remove the TF card and delete the files inside.
Mainboard firmware update：
1. Format the SD card on the computer side, and select 4096 for the allocation unit size.
2. Put the firmware file "Ender-3S1_Pro_HWv24S1_301_SWV2.0.8.23F1_F103_Fused deposition modeling_LASER.bin" and the STM32F4_UPDATE folder into the SD card at the same time (THIS STEP IS REQUIRED， PLEASE NOTE！).
3. Turn off the printer and insert the SD card into the card slot on the motherboard.
4. Reboot and wait for the update to finish.
5. After finishing the update, remove the SD card from the motherboard slot and delete the bin file inside.
Printer: Ender-3 S1 Pro
Printer Mainboard: V2.4
Notes: This is the special firmware for Ender-3 S1 Pro, which Supports adding CV-Laser Module, and automatic switching between Fused deposition modeling and laser printing.
Display firmware update：
1. Format the TF card on the computer side, and select 4096 for the allocation unit size.
2. Put the file "private" and “DWIN_SET”into the TF card at
the same time.
3. Turn off the printer and insert the TF card into the card slot on the back of the screen.
4. Reboot and wait for the update to finish.
5. After finishing the update, remove the TF card and delete the files inside.
Mainboard firmware update：
1. Format the SD card on the computer side, and select 4096 for the allocation unit size.
2. Put the firmware file "Ender-3s1pro_hw24s1_301_V2.0.8.16F1_F103_LASER_Fused deposition modeling.bin" and the STM32F4_UPDATE folder into the SD card at the same time (THIS STEP IS REQUIRED， PLEASE NOTE！).
3. Turn off the printer and insert the SD card into the card slot on the motherboard.
4. Reboot and wait for the update to finish.
5. After finishing the update, remove the SD card from the motherboard slot and delete the bin file inside.
