Ender-3 V3 KE
동영상
매개변수
다운로드
도움말 센터
제품 서비스
매개변수
Core Specifications
Printing Technology
FFF
Printing Accuracy
100±0.1 mm
Layer Height
0.1-0.35 mm
Printing Speed
500 mm/s
Accelaration
8000 mm/s²
Motion System
CoreXZ
Extruder
Upgraded "Sprite" direct drive extrusion
Hotend Material
Nozzle Diameter
0.4 mm
Nozzle Material
Nozzle Temperature
≤ 300 °C
Heatbed Temperature
≤ 100 ℃
Filament Diameter
1.75 mm
Supported Filaments
LA, PETG, ABS, TPU(95A), ASA
Printing Technology
FFF
Printing Accuracy
100±0.1 mm
Layer Height
0.1-0.35 mm
Printing Speed
500 mm/s
Accelaration
8000 mm/s²
Motion System
CoreXZ
Extruder
Upgraded "Sprite" direct drive extrusion
Hotend Material
Nozzle Diameter
0.4 mm
Nozzle Material
Nozzle Temperature
≤ 300 °C
Heatbed Temperature
≤ 100 ℃
Filament Diameter
1.75 mm
Supported Filaments
LA, PETG, ABS, TPU(95A), ASA
Functionality
Leveling Mode
Auto Leveling
Input Shaping
Yes
Al Camera for Monitoring (Timelapse supported)
AI Camera for Calibration (Timelapse supported)
Display Screen
4.3" Color Touch Screen
Remote Control
Rated Power & Voltage
Filament Run-Out Sensor
Power Loss Recovery
Auto Filament Relay
Chamber Temperature
Air Filter
RFID Sensor in Printer
Lighting Kit
Leveling Mode
Auto Leveling
Input Shaping
Yes
Al Camera for Monitoring (Timelapse supported)
AI Camera for Calibration (Timelapse supported)
Display Screen
4.3" Color Touch Screen
Remote Control
Rated Power & Voltage
Filament Run-Out Sensor
Power Loss Recovery
Auto Filament Relay
Chamber Temperature
Air Filter
RFID Sensor in Printer
Lighting Kit
Show More
모두 보기
다운로드
도움말 센터
FAQ
일반 질문
Why does the slicing software always show a failure during installation?
1. Confirm whether it is installed on the C drive of the computer; 2. The software is incompatible with the computer system, try again after replacing other software.
What happened to the temperature fluctuation of the nozzle?
What should I do if the fan does not rotate or there is noise?
How do I troubleshoot common printing problems?
모두 보기
제품 서비스
모두 보기