Seven LD-002R upgrades you need to know
2020-08-11

Seven LD-002R upgrades you need to know


LD-002R 3d printer is the latest DLP printer, which has the characteristics of high precision and high stability. Here are some upgrades of the Creality LD-002R 3d printer.

3d printer


1. Air filtering system

The air filtering system is a humanized design of the LD-002R 3d printer. You can print indoor freely. This 3d printer has double fans and an active carbon air filtering system deodorizes the odor from resin. Some resins may be smell bad, but if you print a model with an LD-002R 3d printer, you don't have to suffer from smell anymore.

2. Ball linear rails

Ball linear rails with high precision ensure Z-axis to move stably and eliminate waviness. The height of the 3d printing model is 160MM. The model has a smooth surface and fine details.

3. Uniform light

LD-002R 3d printer uses an LCD screen to mask an image of a layer over a UV light source with a 405nm wavelength. LCD light bulbs in parallel matrix provide uniform light with light evenness up to 90%. Reflective cup improves light concentration and even illumination. A stable light source decides a higher print success rate.

4. 2K micron-level accuracy

3d printer


There is the 2K micron-level accuracy on the Creality LD-002R 3d printer. 2K solid-state display system achieves a precision of 0.02-0.05mm, producing a smooth surface and delicate finish. The single spot is 26.1μ㎡, and its precision can rival the industrial-grade machines, meeting the demand for fine printing. 


Have a look at the picture with the power function. Only the very expensive DLP 3D printer has such a fine surface.
(Notice: only effectively reduce the zigzag phenomenon, not at all.)

5. All-metal integrated shell

LD-002R 3d printer has an all-metal integrated shell with an elegant and high-end appearance. you can observe the printing process at 360 degrees.

6. All-new UI interface

The new UI interface of LD-002R 3d printer supports Chinese and English, monitors the real-time printing. With a 3.5inch touch screen, it has high resolution and clear display.

7. ChiTuBox slicer

LD-002R 3d printer uses ChiTu Box firmware and pairs with the ChiTuBox slicer, which features 4x and 8x anti-aliasing as standard. So, it has unbelievable precision. The slicer with an Intelligent support algorithm can make you preview the model, support the modification of a model, and allow various files. It can save you much time and energy, what convenient.


Keep researching, keep innovating, Creality is always one of the best 3d printer manufacture in China. 

Free Consultation
Don't hesitate to e-mail us with any questions or inquiries, we would be happy to answer your questions.
If you have any questions or suggestions, please leave us a message, we will reply you as soon as possible!
Send

Recommend Reading

Leave a message