Model Position Affects Printing Effect for LD-002R
LD-002R is the latest DLP 3D printer with ultra-high precision and elaborate surface. There are the 2K solid-state display system, 405nm wavelength UV light source, and high multiple anti-aliasing function. If you want to print some ultra-high precision models, the LD-002R printer will be your best choice. But please remember that different models are placed in different positions, with different printing effects, so put the model in the right place.
There is an introduction to the position of model. When you place the model parallel to the platform. The printed model will be as the following.
When you place the model at 0°with the platform diamond, the printed model will be the following.
When you place the model at 45 ° with the platform, the printed model will be like the following.
When you place the model at 45 ° with the platform diamond, the printed model will be like the following.
Like the following, different models are placed in different positions, with different printing effects
For the rhombus model structure, from a smaller cross-sectional area to a larger cross-sectional area will lead to volume changes between layers, such as rhombus 0°and 30°, the printing is more difficult. However, the drastic change of resin volume between layers will lead to the shrinkage of the solidified layer. The uneven resin between layers and the increased peeling force lead to sharp shrinkage, which is the main reason for the lack of model and the uneven model.
The drastic change of the model structure not only affects the integrity of the model but also causes the surface of the model to appear lamination. By optimizing the placement angle of the model, it is obvious that it has different effects on the print quality.
So if you want to print an elaborate and beautiful model, please put the model in the right place. The printing effect is the best from 30°.